Products HomeMagnetic Measuring Tape
- Hands-Free Measuring
- Imperial and Metric Scales
MFT1
Magnetic Measuring Tape
MFT1 Measuring Tape Covering One Row of Holes on an Optical Table
Please Wait
Features
- Magnetic Over Entire Backside of Ruler
- Attaches to Optical Table or Breadboard for Hands-Free Measurement Guide
- Flexible Material for Easy Rolling and Storing
- Numeric Marks Every 1" and 1 cm, Tick Marks Every 1/8" and 1 mm
- L x W x Thickness: 1 m x 1" (25.4 mm) x 0.03" (0.8 mm)
This vinyl magnetic measuring tape provides a convenient solution for determining approximate distances hands free on an optical table or breadboard. With a magnetic back that extends over the full length and width of the ruler, this measuring tape lays flat on any magnetic surface and features both imperial and metric scales, with numeric marks every 1" and 1 cm and tick marks every 1/8" and 1 mm. Only 0.03" (0.8 mm) thick, the ruler maintains a low-profile on the table. If a shorter length is desired, the ruler can be cut into segments. Please note that vinyl can stretch; consequently, this measuring tape should be used as an alignment aid and not as a precision measurement tool.
| Posted Comments: | |
Fatin Jalil
(posted 2020-09-09 19:29:42.96) Please advise where I can distributor for this part number : MFT1 at Malaysia/Singapore?
That because I just want to purchase for 5 unit only YLohia
(posted 2020-09-10 10:23:27.0) Thank you for contacting Thorlabs. Our list of international distributors can be found here: https://www.thorlabs.com/distributors.cfm. Our distributor in Singapore is Laser 21 Pte Ltd. (sales@laser-21.com). Clément Jacquard
(posted 2020-08-12 11:04:23.153) I am looking for such a product, although I align beams in the near IR.
I would love to have smaller holes like 1mm diameter, every 2mm (yes that's a lot of holes, or even every 1mm with a lateral displacement instead of the inch scale) and a way to stick a VRC4 on the exit side of the holes in the back. This way I can precisely align my near IR beams.
I would buy one and drill holes myself but I would have to anodize it again for the sake of safety. DJayasuriya
(posted 2020-08-14 10:59:05.0) Thank you for your inquiry. One of our application engineers will get in touch directly to discuss custom capability. Nils Dessmann
(posted 2020-07-29 06:31:38.31) The BHM is a super helpful tool. However, it seems that the alignment holes are shifted with respect to the ruler values. The one I use has an offset of less than, but not exactly 0.5mm (e.g. ruler at 200mm, center of hole at approx. 199.6±0.2mm). There are some occasions (aligning OAPs) where this really matters. Is that a fabrication or precisions issue? I can provide images of this. DJayasuriya
(posted 2020-08-06 06:18:33.0) Thank you for getting in touch with us. We have contacted you directly to resolve the issue and our quality team is looking into the fabrication process. mojtaba.zamani.a
(posted 2017-08-19 08:14:20.493) is it possible to buy MFT1 without your logo on it? we just need magnetic tape with its graduations. nbayconich
(posted 2017-08-28 05:57:19.0) Thank you for contacting Thorlabs. I will reach out to you directly about providing this as a custom option. cbrideau
(posted 2013-06-03 18:24:11.48) I would love to see a narrower version of this, say 1cm wide, to make it easier to use on a crowded optical table. tcohen
(posted 2013-06-13 12:49:00.0) Response from Tim at Thorlabs: Thank you for your suggestion. I agree this would be a convenient alternative for tight spaces and I am looking into offering this. |
Zoom
Click to Enlarge
Light from a HeNe Laser Passing Through a Hole in a BHM1 Ruler
- Imperial and Metric Laser Engraved Scales
- 1.0 mm Metric Graduations
- 1/16" Imperial Graduations
- Facilitate Laser Beam Alignment Using Holes Spaced at 1" and 25 mm Intervals
- Measure Beam Height on Magnetic Optical Tables or Breadboards
- Two Neodymium Magnets Provide Holding Force
- Homogeneously Diffusive Anodized Coating
Our BHM1 and BHM2 Magnetic Rulers measure beam heights up to 6" (155 mm) or 12" (305 mm), respectively. The front of the screen is laser engraved with 1.0 mm and 1/16" graduations for beam height measurement. Twelve Ø2.0 mm (Ø0.08") holes positioned next to the engraved numbers at 25.0 mm and 1.00" intervals allow the laser beam to pass through the ruler.
The base of each ruler is fitted with a pair of neodymium magnets that hold the ruler to magnetic work surfaces and provide flexibility of movement when compared to an option that is bolted to the table. They are constructed from bead-blasted aluminum to remove any sharp edges and then anodized to create a homogeneously diffusive surface. The compact size allows the tool to fit into small gaps between components, enabling easy integration into a setup.
We also offer the BHMA1 bracket below for attaching two beam height rulers, allowing for the alignment of a laser beam horizontally in addition to measuring its height off the table.
Please note: Due to the presence of magnets, this ruler should not be used in the vicinity of pacemakers, credit cards, or other devices affected by magnetic fields.
| Item # | Dimensions (W x H) | Footprint (L x W) | Numbered Graduations | Graduations | Hole Spacing | Hole Diameter | Damage Threshold |
|---|---|---|---|---|---|---|---|
| BHM1 | 30 mm x 160 mm (1.18" x 6.30") |
30 mm x 30 mm (1.18" x 1.18") |
Every 1" and 10 mm | 1/16" and 1.0 mm | 1.00" and 25.0 mm | 2.0 mm (0.08") | >350 J/cm2 (1064 nm, 20 ns, 20 Hz, Ø1.14 mm) |
| BHM2 | 40 mm x 310 mm (1.57” x 12.20”) |
48 mm x 40 mm (1.89” x 1.57”) |
Zoom
Click to Enlarge
BHM1 Mounted at 90° on a BHM2 Using the BHMA1 Bracket
Click to Enlarge
VRC4 on a BHM1
- Mount Two Beam Height Rulers Perpendicularly
- Ideal for Horizontal and Vertical Beam Measurements
- Mount a Laser Viewing Card to a Beam Height Ruler
- Built-In Spirit Level Simplifies Leveling of the Mounted Card or Ruler
- Laser Engraved with 1.0 mm Graduations
- Constructed From Black Delrin®*
Thorlabs' BHMA1 Mounting Bracket allows two beam height rulers, sold above, to be attached at a 90° angle. This capability allows for alignment of a laser beam horizontally in addition to measuring its height off the table. As shown in the image to the right, the bracket can also be used to attach Laser Viewing Cards to a ruler, allowing for the viewing of UV, NIR, or MIR beams.
Click for Details
BHMA1 Mechanical Drawing
Constructed from durable black Delrin, this bracket contains a built-in spirit level (bubble level) for consistent leveling of the mounted part. When the bubble is centered between the two graduations the bracket is level. When the center of the bubble is under one of the graduations then the bracket is rotated by 31 arcminutes.
Laser engraved 1.0 mm spaced graduations are also included on three sides of the bracket. These markings can be used to indicate how far the mounted part has been translated horizontally or to repeatably add a ruler or viewing card into the setup.
Two through slots, shown in the drawing to the left, in the bracket are spaced to fit over the top of a BHM1 or BHM2 ruler. Once fitted the bracket is free to translate vertically across the ruler. From here a second ruler or a viewing card is placed in the space between the first ruler and the front of the bracket. Everything is held in place by applying pressure using the thumbscrew on the front of the bracket.
Please Note: These brackets are created from Delrin and are not rated for laser safety.
*Delrin® is a registered trademark of DuPont Polymers, Inc.
Magnetic Measuring Tape