OCT Broadband Fiber Optic Circulator

Polarization Independent
1280-1400 nm Operating Wavelength Range
SMF-28e+ Fiber Pigtails with FC/APC Connectors

CIR-1310-50-APC

FC/APC

Related Items

OCT Circulators & Couplers

Interferometers

1300 nm OCT Systems

Fabry-Perot Interferometers

Imaging Systems Overview

Please Wait

Overview
Feedback

Parameter	Minimum	Maximum
Operating Temperature	0 °C	70 °C
Storage Temperature	-40 °C	85 °C
Operating Relative Humidity (%RH)	5	95
Storage Relative Humidity (%RH)	5	95
Optical Specifications
Operating Wavelength Range	1280 nm	1400 nm
Insertion Loss (Includes WDL, TDL, PDL, and 1 Connector)	-	1.6 dB
Isolation (Includes Wavelength, Temp, Polarization Dependence)	28 dB	-
Directivity (1→3)	50 dB	-
Polarization Dependent Loss	-	0.2 dB
Polarization Mode Dispersion	-	0.05 ps
Chromatic Dispersion	-	3 ps/nm
Return Loss (w/ Connectors)	45 dB	-
Optical Power Handling	-	500 mW
Mechanical Specifications
Packaging Dimensions	Ø 5.5 mm × (L) 38 mm
Fiber Type	SMF-28e+
Pigtail Type and Length	900 μm Loose Tube, 1.0 ± 0.1 m
Connector	FC/APC (Angled) for Each Port

Features

Operating Wavelength Range: 1280 - 1400 nm
1 m Single Mode Fiber (SMF-28e+) Leads with FC/APC Connectors
Insertion Loss (Max): 1.6 dB
Optical Power (Max): 500 mW
Polarization Independent

The CIR-1310-50-APC fiber optic circulator is a passive, polarization-independent, three-port device that acts as a signal router. Light from the input fiber is directed to the output fiber, but light returning through the output fiber gets redirected to a third port with virtually no loss. Light input into port one will not be coupled into the port three fiber, and light input into port two will not be coupled into the port 1 fiber. The CIR-1310-APC was chosen as an OCT-proven broadband circulator due to its flat spectral response over the entire operating range. This component enables balanced detection at the optical output of an OCT interferometer.

For our full selection of fiber optic circulators, please see our Fiber Optic Circulators guide.

Posted Comments:
stephan.stuerwald (posted 2016-03-29 17:03:56.943) Dear Sir or Madam, would a customized broad band circulator be possible which covers 1060 plusminus 50 nanometer? What would be the additional cost? Regards Dr. Stephan Stuerwald besembeson (posted 2016-03-30 04:21:47.0) Response from Bweh at Thorlabs USA: I will follow-up with you regarding this custom item.