Ø1.5" Post Holders
- Holds Ø1.5" Pillar Posts
- Pedestal Style or Post Holder Options
- Compatible with 1/4"-20 or
M6 Caphead Screws
LPH200
Rigid Stand Post Holder with Included Post Collar
Application Idea
LPH100 Ø1.5" Post Holder with Post and C1526 10 mm Cage Clamp Mount
MPA1
Rigid Stand Post Holder Adapter Plate for Mounting to Translation Stages
PB4
Studded Pedestal Base Adapter
PF175B Clamping Fork Securing a Ø1.5" Post with a PB4 Base Adapter
Please Wait
Click to Enlarge
The MPA1 Adapter Used to Mount a Post Holder onto a Translation Stage
Features
- Post Holder or Pedestal Style Clamp for Ø1.5" Posts
- Post Holder with Quick-Release and Height Collar
- Pedestal Base Compatible with PF175B Clamping Fork
- Adapter Plate for Mounting Rigid Stand Post Holders on Translation Stages
Thorlabs' Ø1.5" Post Holders and Pedestal Clamping Fork are ideal solutions for mounting our Ø1.5" posts to a breadboard or optical table. While our line of Ø1.5" posts covers a range of fixed heights, the post holders allow more height flexibility and mounting options. The sturdy 66 mm construction rail body and broad 3.00" (76.2 mm) × 3.52" (89.3 mm) base provide superb stability and solid mounting. Counterbored slots in the base allow the post holder to be directly mounted with 1/4"-20 (M6) caphead screws. A taller post holder should be used with a longer post holder in order to obtain the greatest stability.
Alternatively, the Pedestal Base Adapter allows the user to secure a Ø1.5" post through use of a clamping fork. It has a 1/4"-20 (M6) threaded stud that is designed to thread onto the bottom of our Ø1.5" posts. This adapter is compatible with our PF175B clamping fork, which creates three points of contact with the table for high stability.
We also offer a post holder adapter plate that allows users to mount a rigid stand post holder on translation stages that have four 1/4"-20 (M6) tapped holes with 1" spacing and a sufficient load capacity to support a post holder and additional components. Be sure to check a stage's specifications to determine compatibility. The combination of the adapter plate and a translation stage provides a manual solution for easily translating a post holder within a setup.
Posted Comments: | |
No Comments Posted |
Click to Enlarge
Mechanical Drawing
- Empty Post Holder with Included Post Collar
- Available in Four Heights
- Accepts Ø1.5" Stainless Steel Posts
- Compatible with 66 mm Rail Accessories and Mounts
- Compatible with Our Adapter Plate (Sold Below) for Mounting to Translation Stages
- Motorized Translation Stages Available with 1" of Motorized X and/or Y Travel
Thorlabs' Ø1.5" Post Holders provide a rigid and stable mounting solution for our Ø1.5" posts. They are offered in four stand heights (see mechanical drawing to the right for additional details) to meet the specific requirements of any system. Each post holder features a quick-release handle that locks and unlocks a Ø1.5" post. The included post collar with an alignment pin can be used to maintain a post's height during its rotation. The alignment pin acts as a hard mechanical stop that lets you quickly return to a previously set angle. The base can be secured to a tabletop via four counterbored slots that accept 1/4"-20 (M6) cap screws. The base is also compatible with the MPA1(/M) adapter plate (sold below) that allows a post holder to be mounted on a translation stage.
Click to Enlarge
The PF175B Secures a Ø1.5" Post to an Optical Table with a PB4 Base.
Ø1.5" Post Shown with PB4 Base
Each PB4 (PB4/M) Pedestal Base Adapter has a threaded 1/4"-20 (M6) stud that is designed to thread onto the bottom of our P-Series Posts. For instance, the image to the right shows a P2 post with a PB4 pedestal base. The PB4 adapter allows our PF175B clamping fork to be used to position the post assembly conveniently on your optical bench. This clamping fork creates three points of contact with the table for high stability. It is available individually or in packs of five.
Please note that significant overtightening of clamping forks can deform the surface of an optical table, which can cause misalignment of components and decrease stability of the clamping fork.
Click to Enlarge
The MPA1 Adapter Used to Mount a Rigid Stand Post Holder onto a Translation Stage
- Mount a Rigid Stand Post Holder onto a Translation Stage
- Matches the Compact Footprint of Post Holder
- Four 1/4" Counterbored Holes for Mounting to a Translation Stage
- Four 1/4"-20 (M6) Tapped Holes for Mounting a Post Holder
The MPA1(/M) Rigid Stand Post Holder Adapter Plate allows users to mount a post holder onto a translation stage that has four 1/4"-20 (M6) tapped holes with 1" spacing and a sufficient load capacity to support a post holder and additional components. Be sure to check a stage's specifications to determine compatibility. The combination of the adapter plate and a translation stage provides a manual solution for easily translating a post holder within a setup.
To assemble, attach the adapter plate onto the translation stage via the four 1/4" (M6) counterbored holes that accept 1/4"-20 (M6) cap screws. Then mount the rigid stand onto the adapter plate using the four 1/4"-20 (M6) tapped holes; see the image to the right.