Products HomeBNC Cables
- BNC to BNC Cables
- SMA to BNC Cables
- SMB to BNC Cables
- SMC to BNC Cables
- MMCX to BNC Cable
CA2648
CA2824
2249-C-24
CA3124
SMC Female Connector
SMA Male Connector
BNC Male Connector
BNC Male Connector
Please Wait
All the cables sold by Thorlabs that have a BNC connector on at least one end are displayed on this page. The table below will take you to web pages that contain cables with other connectors.
| Electrical Cables Selection Guide | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| BNC | SHV | SMA | Premium Microwave Cables | SMB | SMC | ||||||
| 6-Pin HIROSE | USB | Banana Patch Cords | Piezo | Stepper & DC Servo | Detector Power Cable | ||||||
| Posted Comments: | |
| No Comments Posted |
Zoom
- 50 Ω Impedance
- DC - 4.0 GHz Frequency Range
- 500 VRMS Working Voltage
- Tarnish-Resistant Brass Body
- Stress-Relief Connectors
- Ø0.2" Cable Outer Diameter
- RG-58 Cable
Zoom
- Increased Flexibility
- 50 Ω Impedance
- DC - 4 GHz Frequency Range
- 500 VRMS Working Voltage
- Tarnish-Resistant Brass Body
- Ø0.1" Cable Outer Diameter
- RG-174 Cable
Zoom
Click for Details
Boot Style May Vary
- Available in 6" to 48" Lengths
- 50 Ohm Impedance
- DC - 4.0 GHz Frequency Range
- 750 V (RMS) Dielectric Withstanding Voltage
- 250 V (RMS) Working Voltage
- Ø0.1" (Ø2.5 mm) Cable Diameter
- RG-316 Cable
Zoom
- Right-Angle SMB Female and Straight BNC Male Connector
- 50 Ω Impedance
- DC to 4.0 GHz Frequency Range
- 1000 V (RMS) Dielectric Withstanding Voltage
- 0.40" (10.2 mm) Minimum Bend Radius
- No Bare Brass, Suitable for Use in Laser Systems
This cable has a right-angle, SMB female connector on one end and a straight, BNC male connector on the other. The connectors are made of nickel-plated brass. The RG-178 coaxial cable is flexible enough to reach a minimum bend radius of 0.4", and the 90° SMB connector allows the cable to be connected in tight areas without putting lateral force on the connection, making this cable ideal for use in space-constrained setups.
The PAA236R can be used with our Polaris® mirror mounts with piezoelectric adjusters.
Zoom
Click for Details
Boot Style May Vary
- Available in 6" to 72" Lengths
- 50 Ω Impedance
- DC - 4.0 GHz Frequency Range
- 750 V (RMS) Dielectric Withstanding Voltage
- 250 V (RMS) Working Voltage
- Ø0.1" (Ø2.5 mm) Cable Diameter
- RG-316 Cable
Zoom
- MMCX Male Connector to BNC Male Connector
- 1 m Cable Length
- DC - 6 GHz Frequency Range
- 50 Ω Normal Impedance
- 170 V Max Operating Voltage
The CA3339 RG-174 coaxial cable features a male MMCX connector on one and a male BNC connector on the other. It can be connected to an I/O port on the Kinesis® Vertical Translation Stage for external triggering applications.
Zoom
- Wall Mount Cable Racks
- Store Cables Straight and Untangled
- T1508 is Ideal for Fiber Optic Patch Cables
The T1508 is a test lead holder for wires up to 0.210" (5.33 mm) in diameter and has 14 slots for cables. It is ideal for holding fiber optic patch cables.
The T2708 is a test lead holder for wires up to 0.450" (11.43 mm) in diameter and has 9 slots for cables.
The cable racks are made from cold rolled steel with a baked enamel finish. The wall mounting holes are separated by 3" (76.2 mm). Both racks are 11" (279 mm) long and extend outward from the wall by 3.5" (88.9 mm).
BNC Cables