Products Home / Optomechanical Components / Optical Rails / 95 mm Optical Rails / Angle Adapters for 95 mm RailsAngle Adapters for 95 mm Rails
- Fasten 95 mm Rails Together in Two or Three Dimensions
- Corner Cube and Rail Clamp Provide Right-Angle Mounting
- Pivot Support Allows Arbitrary Orientations
XT95P4
XT95C1
XT95P13
Please Wait
| XT95 95 mm Optical Rail Accessories | |||
|---|---|---|---|
 |
 |
 |
|
| Rails | Angle Adapters | Leveling Feet | |
 |
 |
 |
 |
| Breadboard Mounting | Mounting Platforms |
T-Nuts and Screws |
Size Adapters |
Features
- Provides Stable and Rigid Connections Between Rails
- Bolted into Rail End with M6 Cap Screws
- Extend Rail Assemblies into Two or Three Dimensions
- Corner Cube and Rail Clamp Permit Mounting at Right Angles
- Pivot Support Enables Arbitrary Angles
Thorlabs' angle adapters for 95 mm rails are fundamental building blocks of two- and three-dimensional rail constructions.
Five-Way Corner Cube
The XT95C1 Five-Way Corner Cube tightens into the M6-tapped holes in the ends of a standard 95 mm rail and orients up to five standard rails at right angles. Each face of the cube contains a large clear aperture that allows the entire rail interior to be used as a beam path.
In order to install rails on adjacent faces of the corner cube, we recommend using our SH6M10LP Low-Profile Channel Screws. The reduced cap height of these screws prevents neighboring screws from interfering with each other.
Construction Clamp
The XT95P13(/M) Rail Construction Clamp allows a 95 mm rail to be mounted horizontally to an optical table or at a right angle on the end of another rail. The clamp can be attached directly to a breadboard surface or rail end using a 1/4"-20 (M6) cap screw in each of the four counterbored slots.
Pivot Support
Our XT95P4 Pivot Support is a heavy-duty joint that connects two rails while providing up to ±90° of variable rotation. Once the rails are at their desired angle, they are fixed in place using a hex wrench.
Thorlabs' product family for 95 mm rails includes angle adapters, leveling feet, and breadboard mounting adapters. In addition, we manufacture mounting platforms and T-Nuts that provide compatibility with standard optomechanics. Together with size adapters that incorporate 66 mm rails into an XT95 setup, these tools provide a complete family of rigid, versatile building blocks suited for virtually any optomechanical setup.
Click to Enlarge
XT95P4 Packaging
| Item # | % Weight Reduction | CO2-Equivalent Reductiona |
|---|---|---|
| XT95P4 | 8.52% | 0.37 kg |
Smart Pack
- Reduce Weight of Packaging Materials
- Increase Usage of Recyclable Packing Materials
- Improve Packing Integrity
- Decrease Shipping Costs
Thorlabs' Smart Pack Initiative is aimed at waste minimization while still maintaining adequate protection for our products. By eliminating any unnecessary packaging, implementing packaging design changes, and utilizing eco-friendly packaging materials for our customers when possible, this initiative seeks to improve the environmental impact of our product packaging. Products listed above are now shipped in re-engineered packaging that minimizes the weight and the use of non-recyclable materials.b As we move through our product line, we will indicate re-engineered packages with our Smart Pack logo.
| Posted Comments: | |
bdada
(posted 2011-10-12 16:26:00.0) Response from Buki at Thorlabs:
Thank you for your interest in our XT95 rail products. We do not have a standard version of the XT95P1 rail plate with 1/4"-20 tapped holes, but I will contact you regarding a custom version. I will also ask our engineers to consider introducing the 1/4"-20 version as a standard item. cathy.y.wong
(posted 2011-10-11 18:59:11.0) Do you have a version of XT95P1 with 1/4-20 taps? Thanks! Thorlabs
(posted 2010-10-05 17:01:24.0) Response from Javier at Thorlabs to rbjaculbia: We currently do not have an imperial version of the XT95P2. However, we can quote a version with 1/4"-20 tapped holes. I will contact you directly with more information. rbjaculbia
(posted 2010-09-09 05:02:41.0) do you have an imperial version of the XT95P2 (i.e. with 1/4-20 taps instead of m6)? Thank you |
Zoom
Click to Enlarge Five Rails at Right Angles
- Joins up to Five Rails in Parallel or Perpendicular Orientations
- One-Piece Aluminum Construction for Excellent Rigidity
- Use with Low-Profile Channel Screws (Sold Below)
The XT95C1 Five-Way Corner Cube secures rails end to end or at right angles. The five mounting faces of the cube contain a centered, Ø2.83" (Ø71.9 mm) clear aperture that leaves the entire rail interior unobstructed. Each face also has four through holes that are positioned to align with the inner M6-tapped holes on the end of a standard 95 mm rail. The cube is machined from a single block of aluminum to ensure the perpendicularity and parallelism of the five mounting surfaces.
Please note that the caps of standard M6 cap screws will interfere with each other when installed in neighboring faces of the cube, preventing the rails from being fastened down. We therefore recommend the use of our SH6M10LP Low-Profile Channel Screws, sold below, which feature a shortened cap height.
Zoom
Click to Enlarge
XT95P13 Mounted to End of 95 mm Rail
Click to Enlarge
95 mm Rail and Clamp Mounted to Breadboard via LT101 Base Plate
Click for Details
XT95P3 Mechanical Drawing
- Mount a 95 mm Rail Horizontally from an Optical Table
or a Base Rail - Four Angled Counterbored Slots Provide Imperial and Metric Compatibility
- Attaches to a Rail End Using Four M6 Cap Screws
(Not Included) - 1/4"-20 (M6) Locking Cap Screw, 3/16" (5 mm) Hex
- LT101(/M) Base Plate Provides Accessible Slots when Rail is Attached
This 95 mm Rail Construction Clamp allows a 95 mm rail to be mounted horizontally to an optical table. The clamp can be attached directly to a breadboard surface via 1/4"-20 (M6) cap screws in the four counterbored slots. Once the clamp is in the desired location, a 95 mm rail can be inserted in the clamp and secured by tightening the locking cap screw on the side of the clamp. Note that the mounting slots are not accessible while a rail is in the clamp.
It is also possible to mount the clamp to the end of a 95 mm rail using the rail’s M6 tapped holes, as shown in the image to the far right. In this orientation, the clamp is free to secure another 95 mm rail at a right angle. When mounted on the end of a 95 mm Precision Construction Rail, a set of Ø3.0 mm dowel pin holes can be used to aid in aligning the clamp on the rail (dowel pins not included).
For more flexible breadboard mounting, the clamp is designed for compatibility with the LT101(/M) base plate. The LT101 used in conjunction with the XT95P13(/M) enables the user to reposition the assembly without having to remove the rail from the clamp. This is becasue the LT101 design provides free access to the mounting screws, as shown in the image above. Both the LT101 base plate and the XT95P13 rail clamp have matching Ø0.125" alignment holes for dowel pins (not included) to help ensure that they are orthogonal.
Zoom
Click to Enlarge
- Holds Two Rails at an Arbitrary Angle
- Angle is Locked by a 3/4" Bolt and Nut Combination
- Eight M6 Cap Screws and 5 mm Hex Key Included
The XT95P4 Pivot Support is a heavy-duty joint that offers ±90° of variable rotation. It is ideally used to construct large-scale, non-rectangular structures. Once the attached rails have been set to the desired angle, tightening the side-mounted 3/4" bolt and nut combination locks the joint in place.
Each side of the joint contains four through holes at the corners, positioned to fasten the joint to the XT95P3 Base Plate or the outer M6 taps on the end of a standard 95 mm rail. The XT95P4 also features four M6 taps on each side that enable mechanical compatibility with the XT95P11(/M) Rail Carriage sold above. The combination of the pivot support and rail carriage, shown to the right, allows two 95 mm rails to be mounted at an arbitrary angle starting anywhere along the base rail.
Zoom
Click to Enlarge Low-Profile Channel Screws in Five-Way Corner Cube
Our low-profile screws feature a shorter cap height than standard M6 cap screws. They are required to fasten an XT95C1 Five-Way Corner Cube to a 95 mm rail when two rails are being mounted at a right angle because their reduced cap height prevents neighboring screws from interfering with each other.
| Item # | Threading | Thread Length | Hex | Head Height | Quantity | Material |
|---|---|---|---|---|---|---|
| SH6M8LP | M6 x 1.0 | 8 mm (0.31") | 4 mm | 4 mm (0.16") | 50 | Steel, Black Oxide Finish |
| SH6M10LP | 10 mm (0.39") | 100 | ||||
| SH6M16LP | 16 mm (0.63") | 50 |
95 mm Angle Adapters