Ø1" (Ø25.0 mm) Post Clamp Accessories
- C-Clamps with Tapped or Counterbored Holes
- Clamps for 30 mm and 60 mm Cage Support
- Clamps with Rotating Threaded Studs
RA90RS
Mounts Ø1" to Ø1/2" Posts
(Posts Sold Separately)
1/4"-20
(M6) Tap
1/4" (M6)
Counterbore
RM1B
C1026
For 30 mm
Cage Systems
RM1D
0.4" (10 mm)
Vertical Adjustment
PJ301 Mounting Joist Holds Retroreflecting Mirrors (All Parts Sold Separately)
Application Idea
Please Wait
Quick Links | |||
---|---|---|---|
Post Clamps for Optomechanics |
Right-Angle Post Clamps |
Post Clamps for Cage Systems |
Mounting Joists |
C-Clamps
Thorlabs' Ø1" (Ø25.0 mm) post clamps feature a C-clamp design that allows them to be slipped on and off of a Ø1 (Ø25.0 mm) post. The clamp is secured using a non-marring brass-tipped setscrew. The clamps come in a variety of styles, each with different mounting features; see below for details.
For mounting larger systems or multiple components onto a Ø1" or Ø25 mm post, we also offer vertical mounting clamps and horizontal mounting brackets.
Right-Angle Mounts
These right-angle mounts allow a Ø1" (Ø25.0 mm) post to be mounted at a right angle to another Ø1" (Ø25.0 mm) post or to a Ø1/2" post. They each feature a flexure clamping design for the Ø1" (Ø25.0 mm) post clamps.
Cage System Clamps
Our cage system clamps are designed to support 30 mm and 60 mm cage systems and feature a quick-connect cage clamp with single-screw locking. They clamp onto our Ø1" (Ø25.0 mm) posts using a flexure mechanism.
Mounting Joists
Thorlabs' compact mounting joists can be used to mount multiple optical elements close together, alleviating the need for multiple posts and posts holders. These versatile joists can also offset a post from the mounted optic in order to squeeze the optic into tight areas.
Posted Comments: | |
user
 (posted 2020-06-01 19:44:57.203) For very limited space applications, it would be nice to have the same as the RSA90 and RSA90/M, but in 1/2" (so same as RA90 and RA90/M, but without the screws taking some space at the end). YLohia
 (posted 2020-06-02 10:50:36.0) Thank you for your feedback. The RA90[/M] features 1/4"-20 [M6] taps with ~33 mm thread depth. You may use the SS25S10 [or SS6MS25] or any other 1/4"-20 [M6] tapped setscrew of the appropriate length to lock the post instead of the included thumbscrew for space-constrained applications. jeff
 (posted 2018-12-26 15:41:08.45) Wondering if there is a way to just get the clamp part of the cage clamp assembly. llamb
 (posted 2018-12-27 09:00:52.0) Please email techsupport@thorlabs.com for quote requests on any custom or component items. I have reached out to you by email to discuss. user
 (posted 2018-06-19 13:31:00.917) It would be very nice to have a 0-degree version of this product, to place a 1/2" post parallel to a 1" post. YLohia
 (posted 2018-06-19 09:57:48.0) Hello, thank you for your feedback. I have posted this idea on our internal engineering forum. sgeiger
 (posted 2016-10-25 10:42:58.223) Hello,
in the step data there is an mistake.
The "CLEARANCE HOLE FOR USE WITH M4 [8-32]CAP SCREW" is from the oposite side. (see also PDF data - that's right)
Can I get an correct step-file?
Best regards tfrisch
 (posted 2016-10-26 10:37:23.0) Hello, thank you for contacting Thorlabs. I have sent you a corrected STEP file, and we are working on updating the webpage as well. Thank you for pointing out this error. |
Item # | Mounting Featuresa | ||
---|---|---|---|
Tapped Hole |
Counterbored Hole |
Mounting Stud |
|
RM1A(/M) | 8-32 (M4) | #8 (M4) | N/A |
RM1B(/M) | 1/4"-20 (M6) | 1/4" (M6) | N/A |
RM1C(/M) | 8-32 (M4) | N/A | 8-32 (M4) |
RM1A(/M), RM1B(/M), and RM1C(/M) C-Clamps for Ø1" (Ø25.0 mm) posts each have two mounting points located 90° apart for perpendicular mounting of optomechanical components. On the RM1A(/M) and RM1B(/M), one of the mounting points has a tapped hole and the other has a counterbored hole. Alternatively, the RM1C(/M) has one mounting point with a rotating threaded mounting stud and another with a tapped hole. The C-clamp design allows these clamps to slide along a post to the desired position, where they can be locked by tightening the brass-tipped (non-marring) setscrew with a 5/64" (2 mm) hex key or balldriver.
Click to Enlarge
Two Ø1" Posts Mounted Orthogonally Using the RM1D Clamp
Click to Enlarge
Mechanical Drawing
The RM1D(/M) Adjustable C-Clamp for Ø1" (Ø25.0 mm) posts allows users to mount a Ø1" post orthogonally over another Ø1" post without introducing a lateral offset. The C-clamp holds the orthogonal post with a brass-tipped (non-marring) setscrew that is actuated using a 5/64" (2 mm) hex key or balldriver. Once secured, the assembly can slide along a post, granting height variation of of 0.4" (10 mm). The chosen height can be locked in by tightening the 3/16" (5 mm) hex thumbscrew at the side of the mount. The clamp has a #8 counterbore at the base, allowing it to be mounted to many of our posts. There is also an 8-32 tap at the top of the part for inverted mounting.
Click to Enlarge
Two Ø1" Posts Mounted Orthogonally Using the RSA90 Clamp
- Mounts Two Ø1" (Ø25.0 mm) Posts Perpendicular to Each Other
- Flexure Clamping Mechanism Secures Right-Angle Clamp to Ø1" (Ø25.0 mm) Posts
- 1/4"-20 (M6) Cap Screws Secure the Posts
- Imperial and Metric Versions Available
Thorlabs' RSA90(/M) Right-Angle Clamp allows one Ø1" (25.0 mm) post to be mounted perpendicularly to another Ø1" (25.0 mm) post. The clamp features a highly stable flexure lock design that is secured using a 3/16" (5 mm) balldriver. The center-to-center distance between the two posts is 1.25" for the imperial version and 30.0 mm for the metric version.
- Mounts a Ø1/2" Post Perpendicular to a Ø1" (Ø25.0 mm) Post
- Flexure Mechanism Secures Right-Angle Clamp to Ø1" (Ø25.0 mm) Post
- Thumbscrew Secures Ø1/2" Post
- Imperial and Metric Versions Available
The RA90RS(/M) clamp allows a Ø1/2" post to be mounted perpendicularly to a Ø1" (25.0 mm) post. The design, which is based off of the RA90 Right-Angle Post Clamp, combines a highly stable clamp flexure lock that is secured using a 3/16" (5 mm) balldriver with a thumbscrew locking mechanism. The thumbscrew can be tightened with a torque of up to 50 in-lbs (5.65 N·m). The center-to-center distance between the two posts is 1" for the imperial version and 25.0 mm for the metric version.
Click to Enlarge 60 mm Cage System Mounted on a Ø1" Post Using a C1060 Clamp
Click to Enlarge
- Quick-Connect Cage Clamps for 30 mm and 60 mm Cage Systems
- Easy Drop-In and Drop-Out of Cage Systems
- Single Locking Screw Allows One-Handed Operation
- Compatible with Ø1" (Ø25 mm) Posts
The C1026(/M) and C1060(/M) Cage System Clamps for Ø1" (Ø25 mm) Posts are designed to support 30 mm and 60 mm cage systems, respectively. Two parallel cage rods can be placed in the clamp and locked in place with a single screw. In this way, complete cage system sections can be supported by a single post. The clamp itself can be secured to a Ø1" (Ø25 mm) post by tightening the highly stable flexure lock mechanism with a 3/16" (5 mm) balldriver.
The C15QR(/M) handle can replace the 1/4"-20 (M6) clamping screw for better control when adjusting the clamps, as shown in the image to the right. Note that the C10QR(/M) handle is not compatible with these clamps.
Click to Enlarge PJ302 Post Joint Mounting a Mirror in a Position Offset from the Center of a Ø1" Post
Click to Enlarge PJ301 Post Joist Mounting Two Lenses About the Center of a Ø1/2" Post
- Compatible with Thorlabs' Ø1/2" and Ø1" Posts
- Space-Saving Design Allows for Multiple Optical Elements to be Mounted on One Post
- Options for Center Mounting or Offset Mounting
Thorlabs’ Mounting Joists provide valuable space-saving mounting options that are ideal for crowded optical tables or breadboards. These mounts are compatible with our Ø1/2” and Ø1” posts and allow multiple optics to be mounted close together on a single joist, eliminating the need for multiple posts and post holders.
The PJ301(/M) enables centered mounting in which optics can be placed on both sides of the post center. It features a centered #8 (M4) counterbore for post mounting and two #8 (M4) counterbored slots for mounting optomechanical components. This joist allows an optic to be offset by 0.40" - 1.40" (10.16 mm - 35.56 mm) from the post center.
The PJ302(/M) enables offset mounting in which optics can be mounted to one side of the post center. It features two #8 (M4) counterbored slots with opposite orientations, one for post mounting and one for mounting optomechanical components. This joist allows an optic to be offset by 0.40" - 2.70" (10.16 mm - 68.58 mm) from the post center.
Please note that imperial nuts only fit the imperial joists and metric nuts only fit the metric joists. Nuts are included with the these joists.