Mounting Brackets and Feet for 50 mm & 75 mm Rails
![](https://punchout.webdev02.thorlabs.com/Images/GuideImages/13911_XE5075Mounts_1.jpg)
- Mount and Support Vertical 50 mm & 75 mm Construction Rails
- Right-Angle Brackets for Breadboard Mounting and Corners
- Adjustable-Height Endplates with Plastic Feet
XE50A90
Right-Angle Bracket for 50 mm Rails
XE50FP1
Footplate for
50 mm Square Rails,
Imperial Hardware
XE5075FP1
Footplate for
50 mm x 75 mm Rails,
Imperial Hardware
XE75A90
Right-Angle Bracket
for 75 mm Rails
XE75FP1
Footplate for
75 mm Square Rails,
Imperial Hardware
![](../../images/loading-red.gif)
Please Wait
50 mm & 75 mm Construction Rail Accessories | |||||
---|---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
50 mm Rails | 75 mm Rails | T-Nuts and Screws |
Mounting Brackets & Feet |
Rail Joiners | Channel Insert |
Features
- Right-Angle Brackets for Fixed Breadboard Mounting and Rail Corners
- Adjustable-Height Footplates for Rail Ends
- Compatible with 50 mm Square, 50 mm x 75 mm, or 75 mm Square Rails
These accessories enable vertical mounting of optical rails with 50 mm or 75 mm sides. The right-angle brackets can be used as rail corner mounts or for direct mounting to our breadboards and optical tables. Our mounting footplates attach directly to the ends of optical construction rails.
Thorlabs' accessories for assemblies made of 50 mm or 75 mm rails include T-nuts, low-profile channel screws, rail joiners, and a plastic channel insert for use as a dust cover, panel holder, or cable router.
Posted Comments: | |
No Comments Posted |
![](https://punchout.webdev02.thorlabs.com/images/arrow_Vert.gif)
![XE75A90 as Breadboard Mount](https://punchout.webdev02.thorlabs.com/images/TabImages/Rail_Vertical_A2-150.jpg)
Click to Enlarge
75 mm Square Rail Bolted to Optical Table Using XE75A90 Bracket
![XE50A90 as Breadboard Mount](https://punchout.webdev02.thorlabs.com/images/TabImages/Rail_Vertical_A1-150.jpg)
Click to Enlarge
50 mm Square Rail Bolted to Optical Table Using XE50A90 Bracket
- Brace 50 mm or 75 mm Rail Corners or Mount Rails Vertically
- One-Piece Aluminum Construction for Excellent Rigidity
- Universal Slot Spacing for Imperial and Metric Breadboard Compatibility
- 1.34" (34.0 mm) Long Slots For Use with 1/4"-20 (M6 x 1.0) Cap Screws and Washers
The XE50A90 and XE75A90 Right-Angle Brackets can be used to fasten 50 mm and 75 mm rails, respectively, to each other or to an optical table. Each bracket can be secured to an optical rail by screwing it to T-nuts (not included) inserted into the rail channels. The XE50A90 and XE75A90 brackets have two slots on each leg with 0.99" (25.2 mm) or 1.98" (50.4 mm) spacing, respectively, for compatibility with either imperial or metric breadboards. Either the XE50A90 or the XE75A90 bracket may be used with our 50 mm x 75 mm rails, depending on which side of the rail(s) the bracket is attached to.
![](https://punchout.webdev02.thorlabs.com/images/arrow_Vert.gif)
![XE75FP1 Foot with 75 mm Rail](https://punchout.webdev02.thorlabs.com/images/TabImages/Rail_Foot_A2-150.jpg)
Click to Enlarge
75 mm Rail Mounted on XE75FP1 Mounting Plate
![XE50FP1 Foot with 50 mm Rail](https://punchout.webdev02.thorlabs.com/images/TabImages/Rail_Foot_A1-150.jpg)
Click to Enlarge
50 mm Rail Mounted on XE50FP1 Mounting Plate
- Endplates for 50 mm Square, 50 mm x 75 mm, or 75 mm Square Rails
- 47 mm - 70 mm Height Range
- Plastic Foot Pads
- Four Low-Profile Cap Screws Included
- Imperial Hardware: 1/4"-20
- Metric Hardware: M6 x 1.0
These footplates provide adjustable-height (47 mm to 70 mm) vertical mounting of rail assemblies or enclosures. Each plastic foot is affixed to a bolt that has 14 mm hex flats. When the desired height is achieved, tightening the 19 mm lock nut against the mounting plate secures the bolt's position, as illustrated in the first photo to the right. Each footplate includes four low-profile 1/4"-20 (M6 x 1.0) cap screws.