Manual Drives, 1" and 2" Differential Actuators
- Compatible with a Wide Range of Stages
- Coarse Travel & High Resolution Adjuster in One Package
- Ø3/8" & Ø1/2" Mounting Barrels
- Ideal For OEM Applications
DM12
DRV8
Please Wait
Specifications | ||
---|---|---|
Item # | DM12 | DRV8 |
Coarse Adjustment Range | 1.0" (25.4 mm) | 2.0" (50.8 mm) |
Coarse Adjustment Pitch | 0.5 mm | 0.5 mm |
Fine Adjustment Range | 250 µm | 300 µm |
Fine Adjustment Pitch | 25 µm with 0.5 µm Graduations | 0.05 mm with 1 µm Graduations |
Thorlabs offers a number of Manual Drives for use with RollerBlock Stages. These drives in paticular can be fitted to components with a standard 3/8" or 0.5" mounting barrel.
Fine Adjustment Knob Reattachment for Differential Adjusters
- Step 1: Fully remove the detached knob.
- Step 2: Apply pressure to the tip of the actuator.
- Step 3: While maintaining pressure, screw in the knob 2 to 3 threads.
- Step 4: Once threaded, remove pressure from Step 2 and continue to slowly screw in the knob. Please note that this should be done slowly and with little force. If too much force is applied, cross-threading may occur and may damage the threads.
Differential Adjuster Operation Mechanisms
A differential adjuster consists of four basic parts: outer body, coarse adjustment lock, inner spindle, and fine adjustment knob. Using the DM22 as an example, the video to the left demonstrates how these four parts come together to create a device that allows for coarse and fine adjustments. Also detailed are two different methods of mounting these actuators into an assembly.
Differential Adjuster Mechanisms
- Outer Body:
- Provides Coarse Adjustment
- Contains Internal Threads with a Pitch Smaller than the External Threads of the Inner Spindle
- Coarse Adjustment Lock:
- Prevents the Outer Body from Rotating; Locks Coarse Translation
- Enables Fine Adjustment
- Inner Spindle:
- Mounted within Outer Body
- Contacts the Moving Platform and will Translate with the Coarse Adjuster
- Contains External Threads with Greater Pitch than the Internal Threads of the Outer Body
- Fine Adjustment Knob:
- Internal and External Threads that Match the Inner Spindle and the Outer Body Threads
- Rotating the Knob Provides Inner Spindle Translation that is Equal to the Difference Between the Two Thread Pitches
Posted Comments: | |
user
 (posted 2019-10-25 10:47:46.153) What is the load capacity for DRV8? Is it same with DM12? cwright
 (posted 2019-10-25 07:52:51.0) Hello and thank you for your question. The load capacity for the DRV8 should be 10 kg. user
 (posted 2019-05-22 09:02:52.713) Hi. Does the locking screw prevent rotation of the differential fine adjuster, or only the macro adjuster? Thanks AManickavasagam
 (posted 2019-05-23 06:15:05.0) Response from Arunthathi at Thorlabs: Thanks for your query. The locking screw fixes only the Macro/coarse adjuster position. This is to avoid cross coupling between the coarse and fine adjustment mechanism. georgy.onishchukov
 (posted 2018-02-14 09:15:03.93) Dear Sir/Madam,
do you have any instruction about cleaning and especially lubricant to be used for smearing of the actuators?
We have problems that turning need too much force to be applied because of hardening of the grease in the thread.
Regards, Georgy
georgy.onishchukov@fau.de llamb
 (posted 2018-02-20 09:13:46.0) Hello, thank you for contacting Thorlabs. You can clean the differential adjuster and its threads with acetone, and then apply Apiezon grease for lubrication. matthias.lange
 (posted 2013-12-12 02:24:06.083) Hi,
what is the Load Capacity of the DM12 Micrometer Head?
Best regards,
Matthias jlow
 (posted 2013-12-17 02:09:34.0) Response from Jeremy at Thorlabs: We recommend the load to be <15lbs for the DM12. |
- 2" (50 mm) Travel
- Non-Rotating Tip
- 0.5 µm Resolution
- Ø1/2" (12.7 mm) Interchangeable Brass Mounting Bushing
- Coarse Adjustment: 500 µm/rev
- Fine Adjustment: 50 µm/rev
This differential drive has been designed for use with single-axis stages equipped with a Ø1/2" (Ø12.7 mm) actuator mounting clamp. The large-diameter differential drive actuator provides fine, ultra-smooth control over motion. The fine adjuster delivers 50 µm of travel per revolution with 1.0 µm graduations. The removable brass bushing allows this actuator to be used in any OEM application requiring 2" (50 mm) of overall travel.