Products HomeOptics Cases
- Individual Cases with Molded Plastic or Foam Pad Inserts
- Multi-Element Cases with Molded Plastic
or Precision Cut Foam Inserts
KT06
KT01
KT03
BX01
OC2RMS & OC22
Microscope
Objective Case
BX0110
Please Wait
Available below are a variety of storage boxes and objective cases that are designed to store optics while they are being transported or not in use.
Thorlabs offers polystyrene storage boxes for unmounted, individual optics. The BX01 Storage Box is for Ø1" optics, the BX02 Storage Box is for Ø2" optics, and the BX03 Storage Box includes foam inserts for optics up to Ø2.5. If the need arises to store or transfer multiple unmounted optics at one time, we offer the BX0510 and BX0110 Storage Boxes, which can hold up to ten Ø1/2" and Ø1" optics, respectively, reducing the amount of space needed to store the optics and makes large quantities of optics easier to transport.
For lenses or filters mounted in an SM-threaded lens tube system, Thorlabs offers the KT01 and KT04 for Ø1" mounted optics and the KT06 for Ø2" mounted optics. The KT03 Storage Box is ideal for storing our
2" x 2" square filters. These black storage boxes feature two latches making them suitable for both storage and transportation. The KT04 and KT06 also feature a carrying handle.
We also provide objective cases for microscope objectives or small optical assemblies using our Ø1/2" lens tubes or Ø1" lens tubes. The lids and canisters are sold separately. Lids are offered with RMS (0.800"-36), M25 x 0.75, C-Mount (1.000"-32), M26 x 0.706, and M32 x 0.75 threading. Two canister sizes are available to fit objectives up to 1.96" long or up to 3.58" long.
For additional storage options, consider our selection of cabinets.
| Posted Comments: | |
txabi
(posted 2019-03-04 10:56:45.85) Dear Thorlabs,
We need a case like KT03 for polycarbonate lenses (CR39).
We are worried about yellowness of polycarbonate as a chemmical reaction with protecting foam.
Do you have any experience about this?
Yours sincerely
Txabi nbayconich
(posted 2019-03-14 10:25:05.0) Thank you for contacting Thorlabs. There are no known reactions that can occur with the foam in our KT03 kits and polycarbonate. david.schimmel
(posted 2018-10-01 09:00:03.81) I'm looking for a carrying case to ship and transport a lens for exhibition purposes. The lens is approximately 220mm in diameter with a plano back surface and a slight spherical front surface. Are you possibly able to adapt one of your molded cases to fit the bill? YLohia
(posted 2018-10-02 08:41:36.0) Hello, thank you for contacting Thorlabs. We will reach out to you directly to discuss the possibility of offering this custom item. alialhulaymi
(posted 2018-07-16 12:21:28.483) Hi, the box seems really nice but can you please tell me what type of plastic is it made of? YLohia
(posted 2018-07-17 11:57:17.0) Hello, the BX03 box is made of polystyrene. jacqui
(posted 2018-01-17 20:34:15.74) I have attempted to contact you via email, and I am still waiting on a response.
Could someone please contact me in regards to my email sent 16th January 2018
Thank you
Jacqui tfrisch
(posted 2018-01-18 05:36:42.0) Hello, thank you for contacting Thorlabs. We have received your email and replied with your requested quote. You can reference that quote number if you need to place an order for those items. ludoangot
(posted 2017-12-07 18:11:05.033) Your objective cases are a very good idea, how about also a C-mount version? Some C-mount lens are about the size of a large microscope lens and would be well protected in your cases. tcampbell
(posted 2017-12-12 08:08:29.0) Hello, thank you for contacting Thorlabs. I have posted this idea in our internal engineering forum. In the meantime, you can use a C-mount objective with the SM1-threaded lid and an SM1A10 adapter. We have updated the web presentation with some information on using these cases with thread adapters. mizuse
(posted 2013-07-24 05:44:44.737) Optics case BX01 is good, however, I hope the modification. Its case volume itself can store up to 4pcs of 1 inch optics if the plastic holder moiety is modified. I think "4-optics in one case" is an ideal choice for us, user of many optics (e.g. 20 Ag mirrors), to reduce the number of optics cases and save the space. cdaly
(posted 2013-07-24 15:44:00.0) Response from Chris at Thorlabs: Thank you for your feedback. For our ten packs of 1" optics we provide these in a single case which holds all ten. They can be seen in the image here: http://www.thorlabs.com/images/GuideImages/2149_BBx-E0x-case_SGL.jpg I will see if we can add the cases as a stock item, but in the meantime I believe we can offer these still as a custom. I will contact you directly about this. jjurado
(posted 2011-05-17 15:46:00.0) Response from Javier at Thorlabs to andre.lampe: Thank you very much for your feedback. We will look into the possibility of offering storage boxes for the BX01 optics cases. I will keep you updated of the status. andre.lampe
(posted 2011-05-17 18:26:42.0) A storage box for the BX01 would be very nice, capacity of 20 or 30 BX01.
For unmounted Filters and Dichroic I have not found a good solution, but a Storage box for this BX01s would fill that gap. jjurado
(posted 2011-02-15 13:05:00.0) Response from Javier at Thorlabs to Lasse Orsila: Thank you very much for submitting your request. I would recommend using our BX03 boxes (2.5" x 2.5" x 1") for storing larger optics.They include foam inserts, which allows them to be used with optics of many different sizes. lasse.orsila
(posted 2011-02-10 15:43:15.0) Hi
We have noticed that you use thicker boxes (thickness about 2-3 cm) for shipping some of the optics (mirror, lenses, filters etc.) but you only sell the thinner boxes (BX1, thickness about 1-2 cm). Would it be possible that you would start selling the thicker boxes, i.e., BX1-Thick :)
Lasse Orsila
Project manager, Dr. Tech.
Optoelectronics Research Centre (ORC)
Tampere University of Technology
P.O. Box 692
FIN-33101 Tampere
Finland
Mobile: +358 40 733 6684
Office: +358 40 198 1059
Fax: +358 3 3115 3400 |
| Product Image (Click to Enlarge) |
 |
 |
 |
| Item # | BX01 | BX02 | BX03 |
| Capacity | 1 | 1 | 1 |
| Quantity | 10 | 10 | 10 |
| Optic Size | Ø1" | Ø2" | Up to Ø2.5"a |
These Optic Storage Boxes are ideal for keeping your unmounted optics clean and damage free when they are not currently in use. The boxes are available with foam inserts or with plastic molds for Ø1" or Ø2" optics. Each box is silk screened with a Thorlabs logo and contact information. Boxes without silk screened information are available by contacting Tech Support.
| Product Image (Click to Enlarge) |
 |
 |
| Item # | BX0510 | BX0110 |
| Capacity | 10 | 10 |
| Quantity | 5 | 5 |
| Optic Size | Ø1/2" | Ø1" |
These Optics Storage Boxes are ideal for keeping up to ten unmounted optics clean and damage free when they are not in use, while also conserving space in the lab. The BX0510 and BX0110 Optics Storage Boxes have a plastic mold insert to secure up to ten Ø1/2" and Ø1" optics, respectively. The BX0510 measures 2.5" x 2.5" x 0.89" (L x W x H) while the BX0110 measures 6" x 4" x 0.67" (L x W x H). Each box is silk screened with a Thorlabs logo and contact information. Boxes without silk screened information are available by contacting Tech Support.
| Product Image (Click to Enlarge) |  |  |  |
| Item # | KT01 | KT04 | KT06 |
| Capacity | 10 | 35a | 10 |
| Quantity | 1 | 1 | 1 |
| Optic Size | Ø1" | Ø1" | Ø2" (Thickness = 1/2") |
| Product Image (Click to Enlarge) |
 |
| Item # | KT03 |
| Capacity | 10 |
| Quantity | 1 |
| Optic Size | 2" x 2" |
Zoom
Click to Enlarge
SM1-threaded optomechanical adapters can be used to secure a glue-in Polaris® mount in an objective case.
- Plastic Lids with Internally Threaded Brass Inserts
- Clear Plastic Canisters for Objectives up to 50.0 mm or 91.0 mm Long (Shoulder-to-Tip Length)
- Magnet on Canister Increases Stability on Optical Tables
- Lids and Canisters Sold Separately
These microscope objective cases are comprised of a lid and a canister, each sold separately. These are designed to store and transport microscope objectives or other small optical assemblies mounted in our Ø1/2" lens tubes or Ø1" lens tubes. Please refer to the tables below for objective compatibility.
Each lid has a brass insert with internal threading to secure the objective. They are designed with large external ridges to reduce the likelihood of the canister rolling when on its side and include an adhesive label for noting the stored objective. Cansiters are offered in two lengths; the maximum allowed objective length is measured from the shoulder to the tip (end) of the objective and does not include the threaded portion. The bottom of each canister has an integrated magnet for stability when upright on an optical table. Polycarbonate should only be cleaned with ethanol, methanol, or isopropyl alcohol. Acetone and other solvents may damage the material.
Microscope objectives with thread types other than those available here can be mounted to a lid using a thread adapter. We also offer optomechechanical adapters for compatibility with 1/4"-20 (M6) and 8-32 (M4) threaded components as shown in the photo above. Please ensure that the adapter and mounted component fit together inside the canister; the adapter must have an outer diameter less than 1.81", and the configuration must not exceed the max objective lengths given below.
| Objective Case Lids | |||||||
|---|---|---|---|---|---|---|---|
| Item # | OC2SM05 | OC2RMS | OC2M25 | OC2CM | OC2SM1 | OC2M26 | OC2M32 |
| Product Image (Click to Enlarge) |
 |
 |
 |
 |
 |
 |
 |
| Internal Brass Threading |
SM05 Series (0.535"-40) |
RMS (0.800"-36) |
M25 x 0.75 | C-Mount (1.000"-32) |
SM1 Series (1.035"-40) |
M26 x 0.706 | M32 x 0.75 |
| Material | Polycarbonate with Brass Insert |
||||||
| Objective Case Canisters | ||
|---|---|---|
| Item # | OC22 | OC24 |
| Product Image (Click to Enlarge) |
 |
 |
| Max Objective Length (Shoulder-to-Tip) |
50.0 mm (1.96") | 91.0 mm (3.58") |
| Inner Diameter | 1.81" (45.7 mm) | |
| Material | Polycarbonate with Neodymium Magnet |
|
 Cases |