Products Home / Optomechanical Components / Optical Cage Systems / Cage System Mounting / Post Mounts for Cage SystemsPost Mounts for Cage Systems
- Supports for 16 mm, 30 mm, and 60 mm Cage Systems
- Ø1/2", Ø1", and Ø1.5" Post Mounting Options
- Quick-Release Versions Available for 30 mm and 60 mm Cage Systems
C1060
60 mm Cage
Horizontal Clamp
for Ø1" Posts
CPMA2
30 mm Cage System
Snap-On Adapter
Application Idea
60 mm Cage System
Mounted on Ø1.5" Post
Using CH1560 Clamp Mount
CP02B
30 mm Cage System
Mounting Bracket
Please Wait
Features
- Clamps and Brackets Provide a Means to Support Cage Segments with Posts
- Solutions Available for 16 mm, 30 mm, and 60 mm Cage Systems
- Snap-On Options for 30 mm and 60 mm Cage Systems
- Mounting Options for Mini Series, Ø1/2", Ø1", and Ø1.5" Posts
Thorlabs' cage supports allow our cage systems to be post-mounted. We offer supports to mount 16 mm cage systems on our Mini-Series Posts, as well as adapters to mount our 30 mm or 60 mm cage systems to our Ø1/2", Ø1" (25 mm), or Ø1.5" posts. For additional information on our cage systems, please refer to the Cage Overview tab.
We also offer the CRA30(/M) 30 mm cage rotation adapter that is compatible with our Precision Rotation Stage.
Mounting Brackets
Thorlabs offers fixed cage post mounting brackets for 16, 30, and 60 mm cage systems. These are secured to two cage rods and allow the cage to be mounted to a post via a counterbored hole. We also offer snap-on cage mounting brackets for 30 and 60 mm cage systems. These may be used to post mount cage rods and are easy to install on assembled cage systems.
Post-Clamp Mounts
These mounts allow for horizontal mounting of 30 or 60 mm cage systems to the side of our Ø1" (25 mm) or Ø1.5" posts. The CV1530(/M) allows for vertical mounting of a 30 mm cage system and clamps to a Ø1.5" post. We also offer the RA90TR(/M), which allows for horizontal mounting of cage rods to a Ø1/2" post.
Cage System Overview
The Cage Assembly System provides a convenient way to construct large optomechanical systems with an established line of precision-machined building blocks designed for high flexibility and accurate alignment.
16 mm, 30 mm, and 60 mm Cage System Standards
Thorlabs offers three standards defined by the center-to-center spacing of the cage assembly rods (see image below). The 16 mm cage, 30 mm cage, and 60 mm cage standards are designed to accomodate Ø1/2", Ø1", and Ø2" optics, respectively. Specialized cage plates that allow smaller optics to be directly inserted into our larger cage systems are also available.
Standard Threads
The flexibility of our Cage Assembly System stems from well-defined mounting and thread standards designed to directly interface with a wide range of specialized products. The three most prevalent thread standards are our SM05 Series (0.535"-40 thread), SM1 Series (1.035"-40 thread), and SM2 Series (2.035"-40 thread), all of which were defined to house the industry's most common optic sizes. Essential building blocks, such as our popular lens tubes, directly interface to these standards.
An example of the standard cage plate measurements determining cage system compatibility.
| Standard Cage System Measurements | |||
|---|---|---|---|
| Cage System | 16 mm | 30 mm | 60 mm |
| Thread Series | SM05 | SM1 | SM2 |
| Rod to Rod Spacing | 16 mm (0.63") | 30 mm (1.18") | 60 mm (2.36") |
| Total Length | 25 mm (0.98") | 41 mm (1.60") | 71.1 mm (2.8") |
| Cage Components | ||
|---|---|---|
| Cage Rods | 16 mm | These rods are used to connect cage plates, optic mounts, and other components in the cage system. The SR Series Cage Rods are compatible with our 16 mm cage systems, while the 30 mm and 60 mm cage systems use ER Series Cage Rods. |
| 30 mm | ||
| 60 mm | ||
| Cage Plates | 16 mm | These serve as the basic building blocks for a cage system. They may have SM-threaded central bores, smooth bores sized for industry standard optics or to accommodate the outer profile of our SM Series Lens Tubes, or specialized bores for other components such as our FiberPorts. |
| 30 mm | ||
| 60 mm | ||
| Optic Mounts | 16 mm | Thorlabs offers fixed, kinematic, rotation, and translation mounts specifically designed for our Cage Systems. |
| 30 mm | ||
| 60 mm | ||
| Cage Cubes | 16 mm | These cubes are useful for housing larger optical components, such as prisms or mirrors, or optics that need to sit at an angle to the beam path, such as beamsplitters. Our cage cubes are available empty or with pre-mounted optics. |
| 30 mm | ||
| 60 mm | ||
| Post and Breadboard Mounts and Adapters | Mounting options for cage systems can be found on our Cage System Construction pages. Cage Systems can be mounted either parallel or perpendicular to the table surface. | |
| Size Adapters | Cage System Size Adapters can be used to integrate components from different cage system and threading standards. | |
| Specialized Components | Thorlabs also produces specialized cage components, such as Filter Wheels, a HeNe Laser Mount, and a FiberPort Cage Plate Adapter, allowing a wide range of our products to be integrated into cage-mounted optical systems. Explore our Cage Systems Visual Navigation Guide to see the full range of Thorlabs' cage components. | |
| Posted Comments: | |
Sara Vidal
(posted 2019-11-12 04:37:40.39) Hello. I'm trying to fix combined elements of 60mm and 30mm to a breadboard with LCPMA2/M and CPMA2/M items. I started fixinx 60mm system, but now I want to fix the 30mm rods but there is a GAP. I would like to know if there is any element I can use to save the distance from the breadboard to the rods in 30mm mounts. YLohia
(posted 2019-11-13 08:29:26.0) Hello, thank you for contacting Thorlabs. I have reached out to you directly to discuss a possible post-mounting solution. user
(posted 2017-12-20 10:47:53.877) On the CP02B, the 4-40 set screws for locking to ER rods normally enter from the top (as oriented in your photos). The drawing and model shows the set screw holes extending through the entire part, but do not indicated if they are tapped all the way through, as well. Is it possible (on the stock part) to insert the 4-40 set screws from the bottom? Thank you. nbayconich
(posted 2018-01-09 03:07:44.0) Thank you for contacting Thorlabs. The 4-40 taps are tapped through the bottom of the CP02B so set screws can be inserted from the bottom of the bracket. lior
(posted 2016-04-20 18:36:00.78) Greetings,
The LCP01B arrives with two cap screws, clamping the flexure locks to the ER rods. I'm afraid these screws are imperial, while the part is supposed to be universal. Do you plan to offer this part with metric screws as well?
Thanks,
Lior besembeson
(posted 2016-04-21 01:27:27.0) Response from Bweh at Thorlabs USA: Thanks for pointing this to us. We are going to consider adding the suitable hex key with the part (short term) to keep this universal. Long term, we will alter the design to use a #3 cap screw that has a universal 5/64 (2mm) hex key. cbrideau
(posted 2014-01-15 18:41:22.543) Is it possible to get something like this, which supports the cage vertically, for your 1" posts instead of 1.5"? jlow
(posted 2014-01-23 05:00:32.0) Response from Jeremy at Thorlabs: We do not currently carry a vertical cage mount for Ø1" post (but we can custom make this). We will look into the possibility of carrying this in the future. |
Zoom
- Compatible with 16 mm Cage Systems
- Two Through Holes for use with Ø4 mm Cage Rods
- Mounting Hole Compatible with 4-40 (M3 x 0.5) Screws and Mini-Series Posts
The SMB1 provides a compact mounting option when working with our compact cage system. The slim, low-profile design is ideal for incorporating 16 mm Cage Systems into an optomechanical assembly.
Please note that this bracket cannot be used directly below an SM05 lens tube.
Zoom
- Compatible with 30 mm Cage Systems
- Three #8 (M4) Counterbores for Post Mounting and OEM Applications
- Cage Rods (Not Included) are Locked into Place with Top-Located Setscrews
- Bracket Offers Clearance for SM1 Lens Tubes
The CP02B provides a compact mounting option for incorporating 30 mm Cage Systems into optomechanical assemblies. Three #8 (M4) counterbored mounting holes allow this adapter to be used with our standard post and post holders in addition to OEM applications, which require secure mounting into a larger system (post and post holder not included).
Zoom
Click to Enlarge 60 mm Cage System with SM02 Lens Tube
Mounted on a Ø1/2" Post Post Using an LCP01B Adapter
- 60 mm Cage System Compatible
- Firmly Lock onto Ø6.0 mm ER Rods with Flexure Locking Design
The LCP01B allows 60 mm Cage Systems to be incorporated into other optomechanical assemblies. This cage plate adapter has a flexure cut design for increased stability. It has two Ø0.24" (Ø6.0 mm) through holes with cap screws that clamp the flexure locks onto the Ø6.0 mm ER Rods (not included). It has three #8 (M4) counterbored holes for post mounting and has been specially designed to provide clearance for SM2 Lens Tubes as shown in the photo on the right.
Zoom
- 30 mm Cage System Compatible
- Snap-On Functionality for Easy Installation or Removal
- Firmly Lock onto Ø6.0 mm ER Rods with Flexure Slot Locking Design
- Off-Axis Mounting Adjustment Range
- CPMA1: ±0.28" (±7.0 mm)
- CPMA2(/M): ±0.20" (±5.1 mm)
These cage mounting brackets provide users with a snap-on solution for adding support posts to assembled 30 mm Cage Systems. The flexure-based design can be quickly snapped onto an open section of two Ø6.0 mm Cage Rods (not included), allowing for easy installation or removal without requiring the disassembly of a cage system. Slide the brackets into the appropriate position and lock into position using the included 0.050" hex key. The slotted post-mounting feature of the brackets allows the cage rods to be installed off the axis of the post (see above for adjustment ranges).
Two options are available for post mounting. The CPMA1 features a slotted #8 (M4) counterbore that allows for mounting of the adapter using an 8-32 (M4) capscrew (included). This is useful for supporting 30 mm cage systems using fixed posts, such as our Ø1" (25.0 mm) posts with 8-32 (M4) taps, as the cage system can be rotated and then fixed to the post at any arbitrary angle. Alternatively, the CPMA2(/M) offers a captive 8-32 (M4 x 0.7) nut in a slot for mounting to Ø1/2" posts in Ø1/2" post holders.
Zoom
- 60 mm Cage System Compatible
- Snap-On Functionality for Easy Installation or Removal
- Firmly Lock onto Ø6.0 mm ER Rods with Flexure Slot Locking Design
- Off-Axis Mounting Adjustment Range
- LCPMA1: ±0.88" (±22.3 mm)
- LCPMA2(/M): ±0.75" (±19.1 mm)
- Brackets Offer Clearance for SM2 Lens Tubes
These cage mounting brackets provide users with a snap-on solution for adding support posts to assembled 60 mm Cage Systems. The flexure-based design can be quickly snapped onto an open section of two Ø6.0 mm Cage Rods (not included), allowing for easy installation or removal without requiring the disassembly of a cage system. Slide the brackets into the appropriate position and lock into position using the included 0.050" hex key. The slotted post-mounting feature of the brackets allows the cage rods to be installed off the axis of the post (see above for adjustment ranges).
Two options are available for post mounting. The LCPMA1 features a slotted #8 (M4) counterbore that allows for mounting of the adapter using an 8-32 (M4) capscrew (included). This is useful for supporting 60 mm cage systems using fixed posts, such as our Ø1" (25.0 mm) posts with 8-32 (M4) taps, as the cage system can be rotated and then fixed to the post at any arbitrary angle. Alternatively, the LCPMA2(/M) offers a captive 8-32 (M4 x 0.7) nut in a slot for mounting to Ø1/2" posts in Ø1/2" post holders.
Zoom
Click to Enlarge 60 mm Cage System Mounted on a Ø1" Post Using a C1060 Clamp
Click to Enlarge
- Quick-Connect Cage Clamps for 30 mm and 60 mm Cage Systems
- Easy Drop-In and Drop-Out of Cage Systems
- Single Locking Screw Allows One-Handed Operation
- Compatible with Ø1" (Ø25 mm) Posts
The C1026(/M) and C1060(/M) Cage System Clamps for Ø1" (Ø25 mm) Posts are designed to support 30 mm and 60 mm cage systems, respectively. Two parallel cage rods can be placed in the clamp and locked in place with a single screw. In this way, complete cage system sections can be supported by a single post. The clamp itself can be secured to a Ø1" (Ø25 mm) post by tightening the highly stable flexure lock mechanism with a 3/16" (5 mm) balldriver.
The C15QR(/M) handle can replace the 1/4"-20 (M6) clamping screw for better control when adjusting the clamps, as shown in the image to the right. Note that the C10QR(/M) handle is not compatible with these clamps.
Zoom
Click to Enlarge 30 mm Cage System Mounted on a Ø1.5" Post Using a CH1530 Clamp
- Securely Mount 30 mm or 60 mm Cage Systems to our Ø1.5" Posts
- Quick-Connect Mechanism for Fast Drop-In/Drop-Out of Cage Assemblies using Ø6 mm Cage Rods
- Cage Clamping Mechanism Activated by 3/16" (5 mm) Hex Cap Screw
- Includes Quick-Release Handle for Easy Mounting to Ø1.5" Posts
The CH1530(/M) and CH1560(/M) Cage Clamps allow 30 mm or 60 mm cage systems, respectively, to be mounted horizontally to our Ø1.5" Posts. The quick-connect mechanism allows for drop-in/drop-out mounting of a cage segment; to secure the cage segment, tighten the hex cap screw on the cage clamping mechanism using a 9/64" (3 mm) hex key or balldriver. Each cage clamp includes a C15QR(/M) Quick-Release Handle for mounting to a Ø1.5" post; additional quick-release handles can be purchased separately below. For low-profile applications, the handle can be removed and replaced with a 1/4"-20 (M6) cap screw at least 1/2" (12 mm) long.
The application to the right shows the CH1530 supporting a cage system composed of 4 ER6 cage rods, an SM1Z Z-Axis Translation Mount, and a CP33T cage plate. This system can be used as a telescope to expand or contract the beam diameter using lenses of appropriate focal length placed in the Z-axis mount and cage plate.
Zoom- Mount 30 mm Cage Systems to Our Ø1.5" Posts
- Can Be Oriented to Mount Cage Systems Vertically or Horizontally
- Quick-Connect Mechanism for Fast Drop-In/Drop-Out of Cage Assemblies
- 15 lb (6.8 kg) Load Capacity
The CV1530(/M) Cage Clamp allows a 30 mm cage system to be mounted vertically to our Ø1.5" Posts. The quick-connect mechanism allows for drop-in/drop-out mounting of a cage segment; to secure the cage segment, tighten the cap screw on the cage clamping mechanism using a 9/64" (3 mm) hex key or balldriver. Each cage clamp includes a C15QR(/M) Quick-Release Handle for mounting to a Ø1.5" post; additional quick-release handles can be purchased separately below. For low-profile applications, the handle can be removed and replaced with a 1/4"-20 (M6) cap screw at least 1/2" (12 mm) long.
The vertical cage clamp can be converted to a horizontal cage clamp. To do so, unscrew the four cap screws on either side of the cage clamps using a 9/64" (3 mm) balldriver or hex key, turn the front plate 90°, and replace the cap screws.
Custom CV1530(/M) Clamp Mounts can be ordered for 16 and 60 mm cage system compatibility. Please contact Tech Support for more information.
Cage Mounting Adapters / Clamps